采用奥钢联DYNAGAP轻压下技术的六流大方坯连铸机

1前言 2001年9月奥钢联得到了为攀枝花钢铁公司6流大方坯连铸机供货的合同.该连铸机设计年生产能力为120万t,将生产280mm×325mm和280mm×380mm两种规格的大方坯,为现有的轧机供应坯料,如图1所示.铸机的特点是配备有DynaGap轻压下技术包.     

An in situ approach to study trace element partitioning in the laser heated diamond anvil cell

Data on partitioning behavior of elements between different phases at in situ conditions are crucial for the understanding of element mobility especially for geochemical studies. Here, we present results of in situ partitioning of trace elements (Zr, Pd, and Ru) between silicate and iron melts, up to 50 GPa and 4200 K, using a modified laser heated diamond anvil cell (DAC). This new experimental set up allows simultaneous collection of x-ray fluorescence (XRF) and x-ray diffraction (XRD) data as a function of time using the high pressure beamline ID27 (ESRF, France). The technique enables the simultaneous detection of sample melting based to the appearance of diffuse scattering in the XRD pattern, characteristic of the structure factor of liquids, and measurements of elemental partitioning of the sample using XRF, before, during and after laser heating in the DAC. We were able to detect elements concentrations as low as a few ppm level (2-5 ppm) on standard solutions. In situ measurements are complimented by mapping of the chemical partitions of the trace elements after laser heating on the quenched samples to constrain the partitioning data. Our first results indicate a strong partitioning of Pd and Ru into the metallic phase, while Zr remains clearly incompatible with iron. This novel approach extends the pressure and temperature range of partitioning experiments derived from quenched samples from the large volume presses and could bring new insight to the early history of Earth.     

On the benefits of location-based relay selection in mobile wireless networks

We consider infrastructure-based mobile networks that are assisted by a single relay transmission where both the downstream destination and relay nodes are mobile. Selecting the optimal transmission path for a destination node requires up-to-date link quality estimates of all relevant links. If the relay selection is based on link quality measurements, the number of links to update grows quadratically with the number of nodes, and measurements need to be updated frequently when nodes are mobile. In this paper, we consider a location-based relay selection scheme where link qualities are estimated from node positions; in the scenario of a node-based location system such as GPS, the location-based approach reduces signaling overhead, which in this case only grows linearly with the number of nodes. This paper studies these two relay selection approaches and investigates how they are affected with varying information update interval, node mobility, location inaccuracy, and inaccurate propagation model parameters. Our results show that location-based relay selection performs better than SNR-based relay selection at typical levels of location error when medium-scale fading can be neglected or accurately predicted.     

Fabrication of layered nanostructures by successive electron beam induced deposition with two precursors: protective capping of metallic iron structures

We report on the stepwise generation of layered nanostructures via electron beam induced deposition (EBID) using organometallic precursor molecules in ultra-high vacuum (UHV). In a first step a metallic iron line structure was produced using iron pentacarbonyl; in a second step this nanostructure was then locally capped with a 2-3 nm thin titanium oxide-containing film fabricated from titanium tetraisopropoxide. The chemical composition of the deposited layers was analyzed by spatially resolved Auger electron spectroscopy. With spatially resolved x-ray absorption spectroscopy at the Fe L? edge, it was demonstrated that the thin capping layer prevents the iron structure from oxidation upon exposure to air.     

Electron-beam-induced deposition and post-treatment processes to locally generate clean titanium oxide nanostructures on Si(100)

We have investigated the lithographic generation of TiO(x) nanostructures on Si(100) via electron-beam-induced deposition (EBID) of titanium tetraisopropoxide (TTIP) in ultra-high vacuum (UHV) by scanning electron microscopy (SEM) and local Auger electron spectroscopy (AES). In addition, the fabricated nanostructures were also characterized ex situ via atomic force microscopy (AFM) under ambient conditions. In EBID, a highly focused electron beam is used to locally decompose precursor molecules and thereby to generate a deposit. A drawback of this nanofabrication technique is the unintended deposition of material in the vicinity of the impact position of the primary electron beam due to so-called proximity effects. Herein, we present a post-treatment procedure to deplete the unintended deposits by moderate sputtering after the deposition process. Moreover, we were able to observe the formation of pure titanium oxide nanocrystals (<100 nm) in situ upon heating the sample in a well-defined oxygen atmosphere. While the nanocrystal growth for the as-deposited structures also occurs in the surroundings of the irradiated area due to proximity effects, it is limited to the pre-defined regions, if the sample was sputtered before heating the sample under oxygen atmosphere. The described two-step post-treatment procedure after EBID presents a new pathway for the fabrication of clean localized nanostructures.     

Multicentre comparison of skin hydration in terms of physical-, physiological- and product-dependent parameters by the capacitive method (Corneometer CM 825)

A multicentre study for measuring skin hydration with 349 volunteers was carried out in six different laboratories. The purpose of the study was to investigate physical-, physiological- and product-dependent parameters of three test emulsions (base, base + moisturizer and base + moisturizer + lipids) in a double-blind study. A comparison between analogous and digital sensor technology of the Corneometer CM825 was examined. Here, a clear relationship between both sensor types could be highlighted. A vital point of the study was the division of the test subjects according to their skin type. To get more objective limits for three different skin types - very dry, dry and normal skin - visual expert evaluation, self-assessment and hydration measurements were analysed by means of statistical methods. The moisture-related skin types were determined as follows: very dry skin was characterized with corneometer units below 30, dry skin between 30 and 40 and normal skin higher than 40 a.u. (arbitrary units). The efficacy of the three test emulsions was examined in relation to the mentioned skin types. Analysing the measured data of all test centres, a clear dependency of skin physiology (skin type) and product efficacy became evident. The drier the skin, the higher the increase of hydration. The product performance of the three test emulsions compared to the untreated control resulted in a significant increase of skin hydration in all measuring centres. The evaluation of a product ranking showed a good differentiation between the basic emulsion and the two other products. An increase of efficacy by adding lipids could be observed in four of six centres. The important influence of the skin type of the volunteers on the degree of product performance, as demonstrated in this study, should be especially considered when drawing up guidelines for efficacy testing.     

Enhancement of the hydrolysis activity of β-galactosidase from Geobacillus stearothermophilus by saturation mutagenesis

Thermostable β-galactosidase (BgaB) from Geobacillus stearothermophilus is characterized by its thermoactivity in the hydrolysis of lactose to produce lactose-free milk products. However, BgaB has limited activity toward lactose. We established a method for screening evolved mutants with high hydrolysis activity based on prediction of substrate binding sites. Seven amino acid residues were identified as candidates for substrate binding to galactose. To study the hydrolysis activity of these residues, we constructed mutants by site-saturation mutagenesis of these residue sites, and each variant was screened for its hydrolysis activity. The first round of mutagenesis showed that changes in amino acid residues of Arg109, Tyr272, and Glu351 resulted in altered hydrolysis activity, including greater activity toward ortho-nitrophenyl-β-d-galactopyranoside (oNPG). The mutants R109V and R109L displayed changes in the optimum pH from 7.0 to 6.5, and the mutant R109V/L displayed different substrate affinity and catalytic efficiency (k_cat/K_m). Mutant R109G showed complete loss of BgaB enzymatic activity, suggesting that Arg109 plays a significant role in maintaining hydrolysis activity. The optimum pH of mutant E351R increased from 7.0 to 7.5 and this mutant showed a prominent increase in catalytic efficiency with oNPG and lactose as substrates.     

In vitro screening of lactobacilli with antagonistic activity against Helicobacter pylori from traditionally fermented foods

Helicobacter pylori may cause stomach diseases such as chronic gastritis, peptic ulcer, and gastric cancer, and several studies reported that lactobacilli have inhibitory effects on H. pylori. In this study, 38 Lactobacillus strains were screened for anti-H. pylori activity using in vitro methods, including survivability under the simulated gastric conditions, agar plate diffusion, urease activity, coaggregation, autoaggregation, and hydrocarbon analysis. The results indicate that 2 Lactobacillus strains showed potential anti-H. pylori activity in vitro. Lactobacillus plantarum 18 had the largest zone of inhibition and markedly reduced the urease activity of H. pylori. Lactobacillus gasseri Chen had higher coaggregation rate (58.15%) and hydrophobicity (59.27%) compared with the other strains. Further research is needed to verify the activities of these strains against H. pylori.     

Cooperation of Network and Service Layer in Mobile Ad hoc Networks

In this article, we investigate how a service discovery protocol at the service layer in Mobile Ad Hoc Networks can be improved, by utilizing routing information from the network layer. We consider in this article proactive routing protocols as basis for the underlying routing mechanism, and focus on the optimization of proactive service discovery protocols. First we introduce a general framework, enabling the cooperation of service layer and network layer, and then we propose the optimization scheme. The performance evaluation done by simulation shows that the proposed cooperation scheme can optimize the service discovery protocol, i.e. reduce the communication cost of service discovery, by utilizing routing table and topology information.     

Assessment of the efficacy of benzalkonium chloride and sodium hypochlorite against Acanthamoeba polyphaga and Tetrahymena spp

The efficacy of benzalkonium chloride and sodium hypochlorite against Acanthamoeba polyphaga and two Tetrahymena spp. was determined based on the European Standard EN 1276:2009 suspension test. Trophozoite viability was assessed by determination of the membrane integrity using flow cytometry as a fast screening technique. Bovine serum albumin was added to simulate clean (0.3 g/liter) and dirty (3 g/liter) conditions. Benzalkonium chloride caused cell lysis at concentrations above 50 mg/liter under clean and dirty conditions. A concentration of 50 mg of free chlorine per liter had a strong biocidal effect on acanthamoebae and tetrahymenae after 15 min under clean and dirty conditions. Our results suggest that benzalkonium chloride and sodium hypochlorite were effective against the three microorganisms at concentrations commonly applied in the food industry.